Wholesale Aluminum alloy Electromagnetic Shut-off Valver Shield Manufacturer JYFJS-011 Series Suppliers, Factories

Product Overview

 

The JYFJS-011 product of our company is used for emergency shut-off of gas pipelines and belongs to the category of gas emergency shut-off valves. It can be connected to gas alarm systems or fire protection and other intelligent terminal control modules to achieve automatic/manual emergency shut-off of the gas source, ensuring gas safety. The valve must be manually opened to meet safety handling standards and comply with gas incident handling requirements.

 

Application

 

This leak detector is widely used in the petroleum, chemical, environmental protection, metallurgy, refining, gas distribution, biochemical medicine, and agriculture industries.

Product Description

Working Principle and Structural Diagram
JYFJS-011 (2)

This valve is a normally open shut-off valve with a holding control mode. It remains open without power during normal operation and can automatically close upon receiving a shut-off signal. After closing, it can be manually opened and will automatically close again upon receiving another shut-off signal.

When a leakage accident occurs, the alarm system sounds an alert, instantly providing a DC pulse voltage to the solenoid valve. The coil is energized, driving the valve to quickly close, cutting off the gas source and entering a self-locking state.

When a gas leak occurs, the alarm's capacitor continuously releases a 3-second DC pulse voltage, energizing the coil, closing the valve to cut off the gas supply, and entering a self-locking state.

The interaction of instantaneous electromagnetic force of the coil, permanent magnetic force, and spring force is used to achieve pulse drive, automatic valve closing, and manual valve opening self-holding functions.

JYFJS-011 (3)
Component Breakdown
Serial Number Area Name
1Valve body
2Diaphragm
3Valve cover
4Spring
5Actuator
6Reset Device
7Dust cover
8Moving iron core
9Sealing ring
Product Model and Main Parameters
JYFJS-011 (5)
JYFJS-011-(5)
JYFJS-011 (4)
Dimensional Specifications
Nominal size DN15
Model DRQF-15-0.1/KTLN
(Aluminum straight-through valve)
DRQF-15-0.01/KTLN
(Aluminum angle valve)
DRQF-15-0.1/KTLN
(Copper straight-through valve)
A (mm) 60 42 60
B (mm) 28 28 27
C (mm) 85.5 84.5 85.5
D (mm) 99.5 126.5 99
Connection method Rp1/2” internal thread (default), customized fittings are subject to the actual product.
Rated flow (m³/h) 1.8 2.5 1.8
Weight (g) 156 173 228
Technical & Environmental Specifications
Explosion-proof typeEncapsulation type
Mold Release AgentNylon
Explosion-proof markingEx mb ⅡC T6 Gb
Explosion-proof Certificate No.CQEx24.1641X
Rated voltage (frequency)DC 12V pulse (capacitor discharge, 2A), continuous power-on time not exceeding 3s, interval time not less than 15s
Permissible power short-circuit current4A
PowerStatic 0W, Operating 24W
Protection levelIP66
Working mediumNatural gas and other non-corrosive gases
Maximum working pressure0.01MPa, 0.1MPa (see nameplate for details)
Opening methodManual opening
Valve closing methodCapacitor pulse drive/manual
Ambient temperature-20(-40)℃~+60℃ (see specific model)
Medium temperature-20(-40)℃~+60℃ (see specific model)
Dielectric strength of solenoid valve500V
Encapsulation agent dielectric strength4000V
Cut-off time< 1 second
Valve body materialAluminum alloy, copper alloy, customizable 304 stainless steel
Sealing materialNitrile rubber
Service life10 years (typical value)
Installation Diagram (Dimensions: mm)
JYFJS-011
  • Valve Closing Operations: There are two ways to close the valve when it is in the open state:
    ① Provide the solenoid valve with an instantaneous DC pulse power (DC12V pulse) for about one second, and the valve will close quickly.
    ② Press the red handle cap, the valve closes.
  • Status Indicator: The red handle above the marking line indicates the open state.
  • Vibration Response: When the valve is open, it may automatically close if subjected to strong vibrations, which is a normal condition.
  • Detachable Actuator: The electromagnetic coil (actuator) is detachable and can be removed or installed by rotating. Non-professionals are prohibited from disassembling or installing it.
  • Safety Reset Protocol: After the valve is shut off in an emergency, it must be manually checked and the fault cleared before resuming ventilation.
  • Manual Reset Operation: When the valve is in the closed position, it can only be opened manually by pulling the red handle upwards.
Unboxing and Inspection

Standard accessories: Product manual (1 piece), factory inspection report (1 piece), product certificate (1 piece), mounting bracket (1 piece), installation accessories (1 piece).

Unboxing inspection: The product appearance has no scratches, the label is intact and clear, and the accessories are complete.

Frequently Asked Questions (FAQ)
1. How does the valve operate under normal versus emergency conditions?
Under normal conditions, the valve remains open without consuming power (Static 0W). During a gas leak event, the connected alarm system provides an instantaneous DC 12V pulse voltage to close the valve automatically within 1 second and locks itself to prevent gas flow.
2. Can the valve reopen automatically after a shut-off?
No. For safety reasons, the valve enters a self-locking state once closed. It must be manually reopened by pulling up the red handle only after the gas leak or hazard has been thoroughly inspected and cleared.
3. What is the power requirement for closing the valve?
The valve operates on a DC 12V pulse drive (capacitor discharge, 2A) with an operating power of 24W. Continuous power-on time should not exceed 3 seconds, with an interval time of no less than 15 seconds.
4. What should be done if strong vibrations cause the valve to close accidentally?
It is normal for the valve to close when subjected to heavy mechanical shock or vibration due to its high-sensitivity protection mechanism. If this happens, verify that there is no gas leak and manually pull the red handle upwards to reset it.
5. What explosion-proof rating and protection grade does this valve have?
The valve features an encapsulation-type explosion-proof design rated Ex mb ⅡC T6 Gb (Certificate No. CQEx24.1641X) and provides an IP66 ingress protection rating, making it suitable for demanding industrial and commercial environments.
6. What materials are available for the valve body?
The valve body is standardly available in aluminum alloy and copper alloy, with customizable 304 stainless steel options available for specialized project requirements.

Related Products

Compare 0/3
Get Comparison Datasheets